Institut für Rechnergestützte Ingenieursysteme

• Opletal, S.; Stoyanov, E.; Roller, D.: Pro-active environment for assisted model composition, in: Cooperative Design, Visualization, and Engineering (CDVE’07), Springer, 2007. ISBN 0302-9743, pp. 70-79.
• Lampasona, C.: Digitale Mammographie in 3D - erste Schritte zu einer verbesserten Früherkennung, in: Best Practice Onkologie, Vol. 2 Nr. 6, Dezember 2007, Springer Berlin/Heidelberg, ISSN 0946-4565, pp. 64.
• Zehtaban, L., Opletal, S., Roller, D.: Moderne Konstruktionsmethodik im ECAD, in: CAD-CAM Report, Nr. 5 May 2007, ISSN 09307117, pp. 64- 67.
• Roller, D.; Mesina, M.: Ganzheitliche Modelle zur Repräsentation aktiven Wissens, in: Entwicklung und Erprobung innovativer Produkte - Rapid Prototyping, Bertsche, B., Bullinger, H.-J. (Hrsg.), Springer Berlin, Heidelberg, ISBN 978-3-540-69879-1, 2007, pp. 209-328
• Roller, D., Warschat, J., Dalakakis, S., Diederich, M.: Agentenbasierte Middleware als Integrationsplattform für aktive Wissenskommunikation im Rapid Product Development, in : Entwicklung und Erprobung innovativer Produkte - Rapid Prototyping, Bertsche, B., Bullinger, H.-J. (Hrsg.), Springer Berlin, Heidelberg, ISBN 978-3-540-69879-1, 2007, pp. 238-266
• Stoyanov, E., MacWilliams, A., Roller, D.: Architecture for Distributed Component Management in Heterogeneous Software Environments, in: T. Sobh (Ed.), Innovations and Advanced Techniques in Computer and Information Sciences and Engineering, Springer, 2007, ISBN 978-1-4020-6267-4, pp. 167-172.

• Roller, D. Opletal, S.: Produktivitätssteigerung durch effizientere ECAD-Systeme, in: Automatisierungs-ATLAS, Tedo-Verlag, Marburg, 2006, pp. 654,
• Opletal, S., Roller, D.: Classification of Design Situations to Support Reuse of Geometric Information, in: I. Horvath, J. Duhovnik (Eds.), Tools and Methods of Competitive Engineering, Vol. 2, , Publishers: Delft University of Technology, University of Lubjlana, Delft, Lubjlana, ISBN 961-6536-04-4, 2006, pp. 1233-1234
• Leymann, F.; Mitschang B.; Roller, D.: Modellgetriebene System- und Anwendungsentwicklung, in: Visionen der Stuttgarter Informatik, Informatik-Forum Stuttgart e.V., 2006, pp. 13-18
• Opletal, S., Roller, D.: Wissensbasierte Techniken für den Einsatz im ECAD, in: D. Roller, S. Opletal (Hrsg.): Elektrotechnik CAD – Intelligente Genetische Algorithmen Aktuelle Entwicklungen, Aachen: Shaker, 2006, ISBN 3-8322-5568-0, pp. 99-113
• Stoyanov, E., Roller, D.: Robust Software Architecture Design of Distributed Product Development System, in: D.; Roller, S. Opletal. (Hrsg.): Elektrotechnik CAD – Intelligente Genetische Algorithmen Aktuelle Entwicklungen, Aachen: Shaker, 2006, ISBN 3-8322-5568-0, pp. 21-32
• Stoyanov, E.; Roller, D.; Wischy, M.: Using Managed Communication Channels in Software Components, 20th International Conference on Advanced Information Networking and Applications, Volume 2 (AINA'06), IEEE Computer Society, Vienna, Austria, 2006, ISBN: 0-7965-2466-4, pp. 499-503
• Stoyanov, E., MacWilliams, A., Wischy, M., Roller, D., Distributed Software Maintenance Using an Autonomic System Management Approach based on the Viable System Model, in P.Dini, D. Ayed ( Eds), Proceedings of icas, International Confernce on Autonomic and Autonomous Systems (ICAS'06), IEEE Computer Society, San Jose, 2006, ISBN: 0-7695-2653-5, pp. 58-64
• Ane, B. K.; Roller, D.; Chihiro, W.: To go beyond from the local optima: Developing 5-axis Response Surface Graph Based on OA L9", M. Jamshidi, D. Cox, S. Nahavandi and J. S. Jamshidi (Eds.), Robotics, Manufacturing and Automation, Volume 19 (Proceedings of WAC 2006), TSI Press, San Antonio, TX, USA, ISBN 1-889335-26-6, pp. 245-250
• Roller, D. Lampasona, C.: A Method for Interpreting Pixel Grey Levels in Digital Mammography, in: Lecture Notes in Computer Science, Image Analysis and Recognition 2006, Springer Berlin/Heidelberg, pp. 580-588
• Opletal, S., Roller, D.: Intelligente Methoden für die CAD-Konstruktion, in: CAD-CAM Report, Nr. 5, Mai 2006, Dressler-Verlag, pp. 36-39
• Stoyanov, E., Wischy, M., Roller, D.: Using Managed Communication Channels in Software Components: In: Proceedings of ACM International Conference on Computing Frontiers, Ischia, Italy, 2006, session: Reconference on autonomic computing, ISBN: 1-59593-302-2, pp. 177-186

• Roller, D.: Objektorientierung in Produktentwicklungssystemen, Stand der Technik und Potenzial In: Roller, D.; Opletal, S. (Hrsg.): ELEKTROTECHNIK CAD, Durchgehende Objektorientierung im Engineering, Achen: Shaker, 2005. ISBN 3-8322-4545-6, pp. 1-13
• Stoyanov, E., Wischy, M., Roller, D.: Cybernetics and General Systems Theory (GST) Principles for Autonomic Computing Designe, Proceedings of icac, Second International Conference on Autonomic Computing (ICA'05), 2005, pp. 389-390
• Roller, D., Mešina, M., Lampasona, C.,: Concurrency Control and Locking in Knowledge Base for Rapid Product Development. In: Cooperative Design, Visualization, and Engineering. Ed.: Luo, Y., Lecture Notes in Computerscience, Springer Verlag, ISBN 0302-9743, pp. 79-85
• Thiel, S, Dalakakis, S., Roller, D.,: A learning agent for Knowledge Extraction from an active semantic Network. In: Enformatika, Volume 7, August 2005. Ed.: Cemal ARDIL, Proceedings of the fifth International Enformatika Conferece, Prague 2005, Czech Republic, ISBN 975-98458-6-5, pp. 217-220
• Stoyanov, S, Dalakakis, S., Roller, D., Wischy, M.: Supporting the Rapid Product Development Requirements by a viable Software Architecture. In: Engineering Design and the Global Economy. Eds.: Samuel, A., Lewis, W., Institution of Engineers, Australia , ISBN 1-904670-00-8, pp. 636-637
• Opletal, S., Roller, D.,: Semantics and Validation of Large Inter-Company Product Models. In: Engineering Design and the Global Economy. Eds.: Samuel, A., Lewis, W., Institution of Engineers, Australia , ISBN 1-904670-00-8, pp. 91-92
• Mešina M, Roller, D., Lampasona, C.: Solution of Traveling Salesman Problems Using Relation Database Systems Possibilities, Limitis and Development Potentials In: Proceedings of the 15th International Conference rocess Control, Slovak University of Technology in Bratislava 2005, Slovak Republic, ISBN 80-227-2235-9, pp. 033_1-33_6
• Dalakakis, S., Dieterich, M., Roller, D., Warschat, J.: Multiagentensystem zur Wissenskommunikation in der Produktentstehung-Rapid Product Develoment. In: Wirtschaftsinformatik 2005,"eEconomy eGovernment eSociety", O. K. Ferstel, E. J. Sinz, S. Eckert, T. Isselhorst eds., Physica-Verlag, 2005, pp. 1621-1640
• Opletal, S., Dalakakis, S., Roller, D.: Towards Semantic-Based CAD: User Interface and Core Components, in: "Applications of Digital Techniques in Industrial Design Engineering", Proceedings of the 6th International Conference on Computer-Aided Industrial Design & Conceptual Design, Eds: Pan, Y., Vergeest, J., Lin, Z., Wang, Ch., Sun, S., Hu, Z., Tang, Y., Zhou, L., International Academic Publishers, Beijing World Publishing Corporation, Beijing 2005, pp. 497-502
• Mešina, M., Roller, D., Lampasona, C., Opletal, S.: Ontology-based element-selection in CAD Models, in: "Applications of Digital Techniques in Industrial Design Engineering", Proceedings of the 6th International Conference on Computer-Aided Industrial Design & Conceptual Design, Eds: Pan, Y., Vergeest, J., Lin, Z., Wang, Ch., Sun, S., Hu, Z., Tang, Y., Zhou, L., International Academic Publishers, Beijing World Publishing Corporation, Beijing 2005, pp. 413-418

• Mešina M, Roller, D., Lampasona, C.: Mapping of Semantic Distances into Geometrical Coordinates - Visualisation of Semantic Networks, In: "Virtuelle und Erweiterte Realität - 1. Workshop der GI-Fachgruppe VR/AR", Hrsg: Guido Brunnet, Martin Göbel und Stefan Müller, Shaker Verlag 2004, pp. 397-408
• Mešina M, Roller, D., Lampasona, C.: Visualisation of Semantic Networks and Ontologies Using AutoCAD. In: Cooperative Design, Visualization, and Engineering, Y. Luo, ed., Springer Verlag, 2004, pp. 21-29
• Roller, D. Eck, O. Dalakakis, S. Knowledge based support of Rapid Product Development, in: Journal of Engineering Design, Taylor & Francis Ltd, Vol. 15, No. 4, 2004, pp. 367 - 388
• Mešina M, Roller, D., Lampasona C.: Solution of Diophantic Equations and Discrete Optimisation Using Low Cost Database Systems.In: Proceedings of the 6th International Conference “Process Control 2004, Juni 08-11. 2004, Kouty nad Desnou, Czech Republic, ISBN 80-7194-662-1, pp 276
• Dalakakis, S., Stoyanov, E., Roller, D.: A Retrival Agent Architecture for Rapid Product Development, in: Perspectives from Europe and Asia on Engineering Design and Manufacture, X.-T. Yan, Ch-Y. Jiang, N. P. Juster, eds., Kluwer Academic Publishers, 2004, pp. 41-58
• Kreuz, I., Roller, D.:Reinforcement Learning and Forgetting for Knowledge Based Configuration, in: 'Progress in Artificial Intelligence Research', Nova Science Publishers, 2004
• Zhang, W., Roller, D.; Zuo, H.: Virtual Reality as Design Tool, Proceedings of the TCME 2004 Lausanne, Schweiz, April 13.-17., 2004
• Zhang, W., Roller, D.; Chen, W., Zuo, H.: Virtual Product Development, in: Perspectives from Europe and Asia on Engineering Design and Manufacture, X.-T. Yan, Ch-Y. Jiang, N. P. Juster, eds., Kluwer Academic Publishers, 2004, pp. 79-88
• Mešina M., Roller, D., Lampasona C.: Unified Relational Data Model and Data Retrieval for Rapid Prototype Development, TCME 2004 Lausanne, Schweiz, April 13.-17.
• Mešina M, Roller, D.: Configuration management using standard tools , in: Perspectives from Europe and Asia on Engineering Design and Manufacture, X.-T. Yan, Ch-Y. Jiang, N. P. Juster, eds., Kluwer Academic Publishers, 2004, pp. 645-658

2003

• Roller, D.; Mešina M.: Unified Relational Datamodel and Rapid Prototyp Development. In: Proceedings of the 14th International Conference “Process' Control 03”, June. 8-11, 2003, Strbské Pleso, High Tatras, Slovakia,.ISBN 80-227-1902-1, , pp 63
• Joosten, H.; Mešina M.; Roller, D.; Shligerskiy, M.: Visualisierung einer aktiven semantischen Wissensbasis für den PPD-Prozeß. In: Roller, D.; Schäfer, D. (Hrsg.): ELEKTROTECHNIK CAD, Band 1: CAE Systeme in Konstruktion und Fertigung, Achen: Shaker, 2003. ISBN 3-8322-2055-0,pp 53-69
• Mešina, M.; Roller, D.: Unified Relational Data Model. In: Roller, D.; Schäfer, D. (Hrsg.): ELEKTROTECHNIK CAD, Band 1: CAE Systeme in Konstruktion und Fertigung, Achen: Shaker, 2003. ISBN 3-8322-2055-0, pp 35-52
• Roller, D.; Kreuz, I.: Selecting and parameterising components using knowledge based configuration and a heuristic that learns and forgets. In: Computer-Aided Design, Elsevier, Vol 35/12, 2003, pp 1085-1098
• Schäfer, D. ; Roller, D.: Electrical Engineering Solutions - ECAE Systeme der dritten Generation. In: atp Automatisierungstechnische Praxis, München: Oldenbourg Industrieverlag, (2003), Nr. 3, pp. 40-44

• Roller, D., Eck, O., Rieg, B., Schäfer, D.: "Representation and Conversion of Dimension Units in CAD Data Models", in: From Knowledge intensive CAD to kowledge intensive Engineeringe, Umberto Cugini and Michael Wozny (eds), Kluwer Academic Publishers, 2002, pp. 91-102
• Roller, D., Mešina, M.; Dalakakis, S.: An Active Semantic Network for Rapid Prototyping, in: Proceedings of the 5th Conference "Informatics and Algorithms ´2002", Sept. 12. - 13. 2002, Technical University of Kosice- Slovakia, 2002, ISBN 80-88941-21-0, EAN 9788088941217
• Schäfer, D. ; Roller, D. ; Böck, D.: "CAE Systeme der dritten Generation – Wahrheit oder Vision". In: Roller, D. ; Schäfer, D. (Hrsg.): ELEKTROTECHNIK CAD: CAE Systeme der dritten Generation. Aachen: Shaker, 2002. - Berichte aus der Konstruktionstechnik. - ISBN 3-8322-0335-4, pp. 1-21
• Roller, D.; Eck, O.; Dalakakis, S.: Integrated version and transaction group model for shared engineering databases, in: Data & Knowledge Engineering, Elsevier Science B.V., 42 (2002), pp. 223-245
• Roller, D.; Dalakakis, S.; Eck, O.: A Knowledge Base for Rapid Product Development, Proceedings of TMCE 2002 Tools and Methods of Cometitive Engineering, Wuhan, China, HUST Press, pp. 171-188
• Schaefer, D.; Roller, D.; Pleßow; M., Wrobel, G.: Schaltschrank-Engineering: Forschungs- und Entwicklungsaktivitäten, CAD-CAM Report, Nr. 4 April 2002, Dressler-Verlag, pp. 44-46
• Schaefer, D. ; Roller, D.: Aktuelle Forschungs- und Entwicklungsaktivitäten im ECAD Umfeld, CAD-CAM Report, Nr. 3 März 2002, Dressler-Verlag, pp. 88-91
• Roller, D. Eck, O. Dalakakis, S.: Advanced Database Approach for Cooperative Product Design, in: Journal of Engineering Design, Taylor & Francis Ltd, Volume 13, Number 1, 2002

• Schaefer, D. ; Roller, D.: E-Learning, Mind Mapping, High Speed Reading - Lernen im dritten Jahrtausend. In: Scheibl, H.-J. (Hrsg.): Softwareentwicklung für Internet und Intranet. Ostfildern : Technische Akademie Esslingen, 2001. - Ostfildern, Germany, September 17-19, 2001, ISBN 3-924813-46-9, pp. 139-150
• Holeczek, A. ; Schaefer, D. ; Roller, D.: Die Prozesskette desSchaltschrankbaus. In: Schaefer, D. ; Roller, D. (Hrsg.): ELEKTROTECHNIK CAD: Neue Technologien, Anwendungen, Systementwicklung, Zukünftige Trends. Aachen : Shaker, 2001. - Berichte aus der Konstruktionstechnik. - Tagungsband zum Workshop in Stuttgart, Germany, July 20, 2001. - ISBN3-8265-9042-2, pp. 37-51
• Mack, J. ; Schaefer, D. ; Roller, D.:Werkzeuge für die rechnergestützte Entwicklung von Schaltanlagen bzw. Schaltschränken. In: Schaefer, D. ; Roller, D. (Hrsg.): ELEKTROTECHNIK CAD: Neue Technologien, Anwendungen, Systementwicklung, Zukünftige Trends. Aachen : Shaker, 2001. – Berichte aus der Konstruktionstechnik. - Tagungsband zum Workshop in Stuttgart, Germany, July 20, 2001. - ISBN 3-8265-9042-2, pp. 151-163
• Pleßow, M.; Schäfer, D.: Workshop Elektrotechnik CAD: GI-Arbeitskreis E/M-CAD. In:ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 96 (2001), Nr. 10, S. 520
• Schäfer, D. ; Roller, D. ; Pleßow, M.: Schaltschrank-Engineering als durchgängiger Prozess. In:CAD-CAM REPORT 20 (2001)
• Roller, D. ; Schäfer, D.: Anforderungen an Software für den globalen Engineering Prozess. In: etz Elektrotechnik und Automation 2001, Nr. 5, S. 14-18
• Schäfer, D., Roller, D.: XML - Grundlagen und Anwendungen des neuen Internet Standards. In: CAD-CAM REPORT 20 (2001), Nr. 2, S. 28-33

• Roller, D. ; Schaefer, D.: "Variational Design in Electrical Engineering - An Extension of Parametric Modeling". In: P. Brunet, C. Hoffmann, D. Roller (Eds.): CAD - Tools and Algorithms for Product Design. Berlin : Springer, 2000. - ISBN 3-540-66204-9, pp. 233-250
• Roller, D. ; Eck, O. ; Rieg, B. ; Schaefer, D.: "Knowledge-Based Representation of Dimension Units in CAD Data Models". In: Cugini, U. ; Wozny, M. (Eds): Proceedings of The Fourth IFIP Working Group 5.2 Workshop on Knowledge Intensive CAD: KIC-4. Centros S. Elisabetta, Universita Degli Studi Di Parma. 2000. - Parma, Italy, May 22-24, 2000. pp. 103-112
• Schaefer, D. ; Roller, D. (Hrsg.): "Bericht zum Seminar über Elektro-CAD" (Sommersemester 2000). Stuttgart, Universität Stuttgart, Fakultät Informatik, Fakultätsbericht, 2000/07, TR-2000-07, August 2000, 191 Seiten
• Schaefer, D. ; Roller, D.:"Advanced CAD/CAM Technologies Assessed from a Users Point of View. - Results of a Survey". In: Proceedings of the 33rd International Symposium on Automotive Technology and Automation : ISATA´2000 : Simultaneous Engineering and Rapid Product Development. Epsom, UK : ISATA Düsseldorf Trade Fair. 2000. - Dublin, Ireland, September 25-27, 2000. - ISBN 1-902856-13-9, pp. 45-59
• Roller, D. ; Schaefer, D.: "Anforderungen an Software für den internationalen globalen engineering Prozess", Tagungsband IT & Automation, Nürnberg, Oktober 28-30, 2000, pp 221-231
• Wolf, K. ; Roller, D. ; Schaefer, D.: "An Approach to Computer Aided Quality Control based on 3D Coordinate Metrology", In: Journal of Materials Processing Technology 107 (1-3) 2000 Elsevier Science, pp.
• Kreuz, I.: "Considering the Dynamic in Knowledge Based Configuration", in Jürgen Sauer, Jana Köhler: Proceedings of the ECAI 2000 Workshop on "New Results in Planning, Scheduling and Design" PUK 2000, Berlin,August 21-22, 2000, pp 83-89 .

• Schaefer, D. ; Roller, D.: Die Methode bestimmt das Ergebnis: Kosten- und Zeitreduzierung durch Varianten- und Komponententechnik. In: DER KONSTRUKTEUR 30 (1999), Nr. 1-2, S. 52-53
• Schaefer, D. ; Roller, D. ; Wolf, K.: Advanced CAQ: Comparing Manufactured Products With Underlying CAD Models. In: Maropoulos, P.G. ; McGeough, J.A. (Hrsg.): Proceedings of the 15th Conference on Computer-Aided Production Engineering : CAPE´99. Durham, England : University of Durham, School of Engineering. 1999. - Durham, England, April 19-21, 1999. - ISBN 0-9535558-0-1, S. 273-280
• Schaefer, D. ; Eck, O. ; Roller, D.: Requirement Analysis for E-CAD Variant Modules. In: Roller, D. (Hrsg.): Proceedings of the 32nd International Symposium on Automotive Technology and Automation : ISATA´99 : Automotive Mechatronics Design & Engineering. Croydon, England : ISATA Düsseldorf Trade Fair. 1999. - Vienna, Austria, June 14-18, 1999. - ISBN 1-902856-00-7, S. 43-51
• Dettlaff, B. ; Roller, D. ; Schaefer, D.: A System Architecture for Modules Supporting Variational Design in Electrical Engineering. In: Roller, D. (Hrsg.): Proceedings of the 32nd International Symposium on Automotive Technology and Automation : ISATA´99 : Automotive Mechatronics Design & Engineering. Croydon, England : ISATA Düsseldorf Trade Fair. 1999. - Vienna, Austria, June 14-18. 1999. - ISBN 1-902856-00-7, S. 53-61
• Schaefer, D. ; Eck, O. ; Roller, D.: A Shared Knowledge Base for Interdisciplinary Parametric Product Data Models in CAD. In: Lindemann, U. ; Birkhofer, H. ; Meerkamm, H. ; Vajna, S. (Hrsg.): Proceedings of the 12th International Conference on Engineering Design : ICED 99. Volume 3. Garching : Technische Universität München. 1999. - Munich, Germany, August 24-26, 1999. - ISBN 3-922979-53-X, S.1593-1598
• Schaefer, D. ; Roller, D.: Elektro-CAD am Wendepunkt - Stand der Technik im ECAD. In: CAD WORLD (1999), Nr. 5, S. 36-38
• Schaefer, D. ; Roller, D.: Software- und Systementwicklung für technische Anwendungen. In: Computer Graphik Markt 1999/2000. 1. Auflage. Heidelberg : Dressler-Verlag, 1999, S. II-2 – II-9
• Roller, D. ; Schaefer, D.: Windowsgestützte Software-Entwicklung im Ingenieurbereich: Stand der Technik - Erfahrungen - Trends. In: Scheibl, H.-J. (Hrsg.): Software-Entwicklung : Methoden, Werkzeuge, Erfahrungen ´99. 8. 1999. Ostfildern : Technische Akademie Esslingen. 1999. - Ostfildern, Germany, September 20-22, 1999. - ISBN 3-924813-42-6, S. 41-62
• Schaefer, D. ; Roller, D.: Der CAD/CAM-Markt und seine Trends aus Anwendersicht, Teil 1. In: CAD-CAM REPORT 18 (1999), Nr. 9, S. 22-29
• Schaefer, D. ; Roller, D.: Der CAD/CAM-Markt und seine Trends aus Anwendersicht, Teil 2. In: CAD-CAM REPORT 18 (1999), Nr. 10, S. 116-120
• Roller, D. ; Schaefer, D.: Variational Design in Electrical Engineering - An Extension of Parametric Modeling. In: P. Brunet, C. Hoffmann, D. Roller (Hrsg.): CAD Tools and Algorithms for Product Design. Springer, 1999, S. 233-250
• Kreuz, I.,Roller, D.: Knowledge Growing Old in Reconfiguration Context, workshop on configuration / AAAI conference 1999, Orlando

• Gao, F., Roller, D.: "A Semantics-based Product Model: Principles and Representations", in:Roller, D. (ed), Proceedings of 31th ISATA, Volume "Automotive Mechatronics Design and Engineering", Düsseldorf Trade Fair, Croydon, England, 1998, pp 127-135
• Gao, F., Roller, D.: "A Formalized Boundary Model and its Applications in Feature-based Modeling", in:Roller, D. (ed), Proceedings of 31th ISATA, Volume "Automotive Mechatronics Design and Engineering", Düsseldorf Trade Fair, Croydon, England, 1998, pp 95-103
• Roller, D., Eck, O.: "Communication and cooperation support in product databases", in:Roller, D. (ed), Proceedings of 31th ISATA, Volume "Automotive Mechatronics Design and Engineering", Düsseldorf Trade Fair, Croydon, England, 1998, pp. 229-235
• Roller, D., Dettlaff, B., Richert, U., Schneider, A.: "Innovative Software Architecture for next Generation Electrical CAD Systems", in:Roller, D. (ed), Proceedings of 31th ISATA, Volume "Automotive Mechatronics Design and Engineering", Düsseldorf Trade Fair, Croydon, England, 1998, pp. 587-596
• Kreuz, I,. Roller, D., Forchert, T.: "Intelligent Configuration System - Object oriented configuring of hierarchical electrical and electronics systems", in:Roller, D. (ed), Proceedings of 31th ISATA, Volume "Automotive Electronics and New Products", Düsseldorf Trade Fair, Croydon, England, 1998, pp. 219-226
• Roller, D., Hagen, H.: "CAD-Freiformflächen, Teil1: Die Repräsentationstechniken", CAD-CAM Report Nr. 4, April 1998, Dressler Verlag, pp. 96-103
• Hagen, H., Roller, D.: "CAD-Freiformflächen, Teil2: Qualitätsanalyse", CAD-CAM Report Nr. 6, Juni 1998, Dressler Verlag, pp. 92-97
• Roller, D., Schaefer, D,. Richert, U.: "Variantentechnologie in Elektrokonstruktion und Anlagenprojektierung - Anwendungsgebiete und Vorteile", CAD-CAM Report Nr. 9, 1998, pp. 90-97
• Drees, R., Pleiss, J., Schmid, R., Roller, D.: "HIMM - Highly Immmersive Molecular Modeling: Integrating Computer Aided Molecular Modeling and Virtual Reality", submitted to GI-Jahrestagung 1998 for publication in Lecture Notes in Computer Science
• Gao, F., Roller, D.:"Modelling of Feature-Based Design Process , DETC`98, ASME Design Engineering Technical Conferences , Atlanta, Georgia, 1998, Extended Abstracts Volume p. 331, Full papers CD, Paper No. DETC/DTM-5644
• Roller, D., Eck, O.: "Knowledge-based techniques for product databases" International Journal of Vehicle Design, 1998
• Drees, R.; Pleiss, J.; Roller, D.; Schmid, R.: Intergrating Molecular Modeling Tools and Virtual Reality Engines: An Architecture for a Highly Immersive Molecular Modeling (HIMM) Environment. In Proceedings Computer Graphics International 1998, F.-E. Wolter and N. Patrikalakis (eds.), IEEE Computer Society, Los Alamos, 1998, pp. 391 - 392
• Schaefer, D.; Roller: "Parametrische Produkt- und Prozeßmodellierung", CAD-CAM Report Nr. 10, 1998, pp. 74-84
• Schaefer, D.; Roller: "Parametrische Modellierung - Situationsanalyse und Trends", CAD CAM Nr. 5, Oktober 1998, pp. 96-104

• Roller, D., Eck, O.: "Active Cooperative Transaction Model for Shared Design Databases", in: J. Rossignak (ed): Proceedings TeamCad: GVU/NIST Workshop on Collaborative Design", Atlanta May 12-13, 1997, Georgia Institute of technology GCATT Building, 250 14th Street NW, Atlanta, pp. 193- 204
• Roller, D., Bihler, Eck, O.: "ASN: Active, distributed Knowledge Base for Rapid Prototyping", in: Roller, D. (ed): Proceedings of 30th ISATA, Volume "Rapid Prototyping in the Automotive Industries & Laser Applications in the Automotive Industries", Automotive Automation Ltd., Croydon, England, 1997, pp. 253-262
• Roller, D., Dettlaff, B., Schneider, A.: "A Modern System Architecture for Electrical Engineering Solutions", in: Roller, D. (ed): Proceedings of 30th ISATA, Volume I, Mechatronics & Automotive Electronics, Automotive Automation Ltd., Croydon, England, 1997, pp. 465-473
• Roller, D., Bihler, M., Stolpmann, M.: "Electronic Business: Optimizing Communication and Information Infrastructures using Web-Technology", in: Roller, D. (ed): Proceedings of 30th ISATA, Volume I, Mechatronics & Automotive Electronics, Automotive Automation Ltd., Croydon, England, 1997, pp. 269-278
• Roller, D., Dettlaff, B., Kuffler, G.: "Eine objektorientierte Undo-Realisierung für ein modernes CAD-System", in: Scheibel, H. J. (ed): Tagungsband des 7. Kolloquiums Software-Entwicklung - Methoden, Werkzeuge, Erfahrungen, Technische Akademie Esslingen, Ostfildern, 1997, pp. 115-128
• Roller, D., Bihler, M., Salaw, J., Böhmerle, F.: "Das Prozeßmodell: Grundlage zur Entwicklung prozeßorientierter Software", in: Scheibel, H. J. (ed): Tagungsband des 7. Kolloquiums Software-Entwicklung - Methoden, Werkzeuge, Erfahrungen, Technische Akademie Esslingen, Ostfildern, 1997, pp. 627-636
• Roller, D., Eck, O.: "Constraint Propagation Using an Active Semantic Network", in Brüderlin, B., Roller, D (eds).: Proceedings of 1st International Workshop on Geometric Constraint Solving & Applications, Technical University of Ilmenau, 1997, pp. 86-94
• Roller, D.: "Variantenkonstruktion und parametrische Modellierung", CAD-CAM Report Nr. 10, Oktober 1997, Dressler Verlag, pp. 102-108
• Roller, D.: "Variantenkonstruktion und parametrische Modellierung, Teil II", CAD-CAM Report Nr. 12, Dezember 1997, Dressler Verlag, pp. 82-86

• Roller, D., Hagen, H.: "CAD", in: Wilhelm, R. (ed.) "Informatik; Grundlagen, Anwendungen, Perspektiven", C. H. Beck Verlag, 1996, pp. 54-56
• Roller, D., Dettlaff, B.: "Realisierung einer modernen ECAD-Systemarchitektur in Anlehnung an das CAD-Referenzmodell", in: Ruland, D. (ed.) "Tagungsband CAD 96, Verteilte und intelligente CAD-Systeme", DFKI GmbH, Kaiserslautern, 1996, pp. 369-383
• Eck, O., Roller, D.: "Integration von wissensbasierten Informations- und Kommunikationssystemen zur Unterstützung der Produktentwicklung", in: Ruland, D. (ed.) "Tagungsband CAD 96, Verteilte und intelligente CAD-Systeme", DFKI GmbH, Kaiserslautern, 1996, pp. 242-255
• Roller, D., Dettlaff, B., Richert, U.: "Rationalization in the Electrical Engineering Process", in: D. Roller (ed): Mechatronics - Advanced Development Methods and Systems for Automotive Products", ISATA Proceedings, Automotive Automation Ltd., Croydon, England, 1996, pp. 279-284
• Bihler, M. Roller, D.: "Adaptive Information Processing for Technical Applications", in: D. Roller (ed): Mechatronics - Advanced Development Methods and Systems for Automotive Products", ISATA Proceedings, Automotive Automation Ltd., Croydon, England, 1996, pp. 143-150
• Roller, D. Bihler: "Objektorientierte Konzepte für Produktdatenmodellierung und CAD-Datenhaltung", in , D. Roller (Hrsg.), Proceedings-Reihe der Informatik '96, Band 5 Produktmodellierung", Institut für Informatik der Universität Klagenfurt, 1996, pp. 91-108
• Mink, U, Roller, D.: "New ECAD System Technology", in D. Roller, P. Brunet (eds), CAD Systems Development - Tools and Methods, Springer-Verlag, 1996, pp. 41-54
• Zhou, X., Roller, D.: "On the Conversion of Dupin Cyclide into Principal Patches", in D. Roller, P. Brunet (eds), CAD Systems Development - Tools and Methods, Springer-Verlag, 1996, pp. 219-234
• Roller, D., Eck, O.: "A Rule Based Transaction Model for Cooperative Multiuser Environments", in Advances in Computer-Aided Design - Proceedings of CADEX ´96, IEEE Computer Society Press, LosAlamitos, California, 1996, pp. 171-177.
• Roller, D., Drees, R.C., Pleiss, J., Schmid, R.D., "Highly Immersive Molecular Modeling (HIMM): An Architecture for the Integration of Molecular Modeling and Virtual Reality", In Hofestädt, R., Löffler, M., Schomburg, D. (eds.). COMPUTER SCIENCE AND BIOLOGY Proceedings of the German Conference on Bioinformatics (GCB'96). University of Leipzig, Leipzig 1996, pp. 190-192

• Roller, D.: "Solid Modeling with Constrained Form Features", in: H. Hagen, G. Farin, H. Noltemeier (eds.) "Geometric Modelling", Springer-Verlag, 1995, pp. 275-284
• Roller, D.: "Werkzeuge für die Produktentwicklung", CAD-CAM Report, Nr. 2, Dressler Verlag, 1995, pp. 50-61
• Roller, D.; Bihler, M.; Stolpmann, M.:"Adaptive hypermediale Informationsaufbereitung in betrieblichen Informationssystemen", in Hypertext - Information Retrieval - Multimedia, R. Kuhlen, M. Rittberger (Hrsg.), Universtätsverlag Konstanz, 1995, pp. 319-331
• Roller, D., Dettlaff, B., Pettinger, F.: "Neue Technologien für Elektrotechnik-CAD", CAD-CAM Report, Nr. 5, Dressler Verlag, 1995, pp. 72-77
• Roller, D.: "Objektorientierung in CAD", Computer Graphik Markt 1995/96, Dressler Verlag, 1995, pp. II-60-II-69
• Roller, D., Dettlaff, B., Pettinger, F.: "Objektorientierte Methoden zur Produktentwicklung", Tagungsband des 6. Kolloquium Software-Entwicklung, 14.09.1995, TAE Esslingen, pp. 203-208
• Roller, D., Richert, U.: "Requirements analysis for next generation CAD user interfaces", in: J. Soliman, D. Roller (eds): "Mechatronics - Efficient Computer Support for Engineering, Manufacturing, Testing&Reliability", ISATA Proceedings, Automotive Automation Ltd., Croydon, England, 1995, pp. 359-366
• Roller, D., Eck, O., Bihler, M. Stolpmann, M.: "An active semantic network for supporting rapid prototyping", in: J. Soliman, D. Roller (eds): "Mechatronics - Efficient Computer Support for Engineering, Manufacturing, Testing&Reliability", ISATA Proceedings, Automotive Automation Ltd., Croydon, England, 1995, pp. 41-48
• Brunet, P., Roller, D., Rossignak, J. (eds): "CAD Tools for Products", Dagstuhl-Seminar-Report 124 (9536), Saarbrücken, 1995
• M.; Bihler, M.; Roller, D., Eck, O.: "Berücksichtigung von Umweltfaktoren im aktiven semantischen Netz", in:H. Lessing, U.W. Lipeck (Hrsg) "Informatik für den Umweltschutz, 10. Symposium für den Umweltschutz", Metropolis-Verlag, Marburg, 1995, pp. 128-138
• Stolpmann, M.; Bihler, M.; Roller, D.: "Aufbau von Umweltinformationssystemen auf der Basis adaptiver hypermedialer Informationsaufbereitung", in H.-D. Haasis, L. M. Hilty, J. Hunscheid, H. Kürzl und C. Rautenstrauch (Hrsg.), Umweltinformationssysteme in der Produktion, Metropolis-Verlag, Marburg, 1995, pp. 55-66

• Roller, D.: "Foundation of Parametric Modelling", Parametric and Variational Design, J. Hoschek and W. Dankwort (eds), Teubner Verlag, 1994, pp. 63-72
• Roller, D: "Computer support for conceptional design", in: "Journal of Circuits, Systems and Computers", Bodgan Fijalkowski (ed), World Scientific Publishing Company, Singapur, Vol. 4, No. 4, 1994, pp. 337-349
• Roller, D.: "Verfahren zur Erzeugung von graphischen Modellen", Deutsches Patentblatt, Ausgabe 25.08.1994
• Roller, D.: "Method for generating graphical models", Patent No. 0 346 517, European Patent Specification, Issue 26.01.1994
• Roller, D.: "Method for generating graphical models and computer aided design system", Patent No. 0 397 904, European Patent Specification, Issue 27.07.1994
• Roller, D.: "Procede pour generer des modeles graphiques", Traduction du Brevet Europeen, 1994
• Roller, D.; Stolpmann, M; Bihler, M: "Product modelling as a major integration factor for future CAD systems", Proceedings of ISATA/Mechatronics ´94, Automotive Automation Ltd., Croydon, England, 1994, pp. 51-57.
• Roller, D.; Bihler, M.; Stolpmann, M.: "Einsatz von Mosaic in der universitären Ausbildung", Tagungsband des Sympiums Hypermedia in der Aus- und Weiterbildung, 12.10. - 14.10.1994, Dresden
• Stolpmann, M.; Bihler, M.; Roller, D.: "GRIPSS: Interactive Skizzenverarbeitung", Tagungsband zum Workshop Visual Computing, 16.03. - 17.03.1994, Darmstadt

• Roller, D.: "Shape Information in Industry Specific Product Data Model", in: G. Farin, H. Hagen, H. Noltemeier (eds.) Geometric Modelling, Springer-Verlag, 1993, pp. 259-266
• Roller, D.: "Compression and Decompression of Scanned Technical Documents", Proceedings of ISATA/Mechatronics 1993, pp. 205-211
• Roller, D.; Reiter, D.: "Erschließung von Information und Wissen: Verfahren zur dynamischen Aggregation von Hypertrails", Hypermedia 1993, H.P. Frei, P. Schäuble (eds.), Springer, pp. 81-92
• Roller, D.; Stolpmann, M.: "GRIPSS: A Graphical Idea-Processing & Sketching System", IFIP Transactions on Interfaces in Industrial Systems for Production and Engineering, J. Rix, E.G. Schlechtendahl (eds), North-Holland, 1993, pp. 13-25
• Stolpmann M., Roller D.: "Sketching Editor for Engineering Design", Human-Computer Interaction: Software and Hardware Systems, G. Salvendy, M. J. Smith (eds), Elsevier, 1993, pp. 609-614

• Roller, D.: "Constrained Form Features in Computer Aided Design", Proceedings of 25th International Symposium on Automotive Technology & Automation, Mechatronics, Florenz, 01.05. - 05.05.1992, pp. 549-555
• Roller, D.: "Technical Information System for Assembly, Test and Service", Proceedings of 25th International Symposium on Automotive Technology & Automation, Mechatronics, Florenz, 01.05. - 05.05.1992, pp. 121-127
• Roller, D.: "On-line System for Service and Repair Documentation", in: H. Luczak, A. E. Cakir, G. Cakir (eds.), Work with Display Units WWDU '92, Section G-Applications in Office and Industry, Berlin 1992, ISBN 3 79 831503 5
• Roller, D.: "Technical Information System for Assembly, Test and Repair", Ergonomics of Hybrid Automated Systems III, P. Brödner, W. Karwowski (eds.) Elsevier, 1992, pp. 273-278
• Roller, D.: "Computergestützter Zugriff auf Service- und Reparaturinformationen", Automobil-Industrie, Technisch-wissenschaftliches Journal für Forschung, Konstruktion, Fertigung und Qualitätssicherung, Vogel-Verlag, Heft 5 1992, pp. 403-404
• Verroust, A.; Schonek, F.; Roller, D.: "A Rule Oriented Method for Parametrized Computer Aided Designs", Computer Aided Design, volume 24 number 10 Butterworth, 1992, pp. 531-540

• Roller, D.: "An Approach to Computer Aided Parametric Design", Computer-Aided Design, Butterworth, Vol. 23, No. 5, July 1991, pp. 385-391
• Roller, D.: "Advanced Methods for Parametric Design", Geometric Modeling: Methods and Applications, H. Hagen, D. Roller (eds.), Springer-Verlag, 1991, pp. 251-266
• Roller, D.: "Hypertext: A revolution in Document Retrieval". Proceedings of International HP-Users Conference, Hamburg, 24.04. - 26.04.1991, pp. 268-278
• Roller, D.: "Automotive Industry Specific Enterprise-wide Information Modelling: A Tool for Development of a CIM Solution Platform", Proceedings of 24th International Symposium on Automotive Technology & Automation, Florence, 20.05. - 24.05.1991, pp. 561-568
• Roller, D.: "Technisches Informationssystem für computergestützten Fahrzeugservice", Proceedings of Hypertext/Hypermedia Symposium, H. Maurer (eds), Springer-Verlag, 1991, pp. 229-237
• Roller, D.: "Computer Aided Technical Information System", HP Open World Magazine, Sept. 1991, pp. 15-17
• Roller, D.: "Technisches Informationssystem am Beispiel von Fahrzeugbetrieben", Proceedings of Tekom Symposium on Online-Dokumentation, München, 16.10. - 17.10.1991

• Roller, D.; Ruess, H.: "An Approach to an Open CAD System Architecture", Advanced Geometric Modelling for Engineering Applications, F.-L. Krause, H. Jansen (eds.), North Holland, 1990, pp. 365-378
• Roller, D.: "Parametrische Formelemente als Basis für intelligentes CAD", Graphik und KI, Kansy, K., Wisskirchen, P., (eds.), Springer, Informatik Fachberichte 239, 1990, pp. 92-102
• Roller, D.: "Variation Design Method Based on Expert System Technology", ISATA Proceedings of 23rd International Symposium on Automotive Technology, Wien, 03.12. - 07.12.1990, Volume II, pp. 241-248

• Roller, D.: "Integration von hochleistungsfähigen Grafikfunktionen in CAD-Systeme", CAD und Computergraphik, Nr. 2, Aug. 1989, Wien, pp. 57-65
• Roller, D.; Gschwind, E.: "A Process Oriented Design Method for Three-dimensional CAD Systems", Mathematical Methods of Computer Aided Geometric Design, T. Lyche and L.L. Schumaker (eds.), Academic Press, New York, 1989, pp. 521-528
• Roller, D.; Schonek, F.; Verroust, A.: "Dimension-driven Geometry in CAD: A Survey", Theory and Practice of Geometric Modellig, W. Strasser, H.-P. Seidel (eds.), Springer-Verlag, 1989, pp. 509-523
• Roller, D.: "A System for Interactive Variation Design". Geometric Modelling for Product Engineering, M. Wozny, J. Turner and K. Preiss (eds.), North Holland, 1989, pp. 207-220
• Roller, D.: "Method for Generating Graphical Models", European Patent Office, Bulletin 89/51, Dec. 1989, publication no. 0 346 517 A1, Bulletin 89/51, Dec. 1989
• Roller, D.: "Design by Features: An Approach to High Level Shape Manipulations", Computers In Industry, North-Holland, Volume 12, No. 3, July 1989, pp. 185-191
• Roller, D.: "A Method for Generating Graphical Models and Computer Aided Design System", European Patent Application no. 89108990., 06.05.1989
• Roller, D.: "Effiziente Modellierung und Modellmodifikation von mechanischen Teilen", CAD und Computergraphik, Nr. 3/4, Okt, 1989, Wien, pp. 115-123
• Roller, D.: "Constrained Features in Solid Modelling", Proceedings of: FAW Workshop CAD und KI, 13. - 14.12.1989, Forschungsinstitut für anwendungsorientierte Wissensverarbeitung, Ulm

• Roller, D.: "Benutzbarkeitsaspekte von CAD-Systemen", CAD/CAM Manual 1988, Institute of industrial Innovation, Linz, 1988, pp. 19-34

• Roller, D.; Mainguy, J.-P.; Kurz, W.: "Internal Design of Design Automation Software and its Consequences for the User", MICAD 86, Proceedings of the fifth European Conference on CAD/CAM and Computer Graphics, Hermes-Verlag, Paris, 1986, pp. 765-783